LG AS-C306MSeries Service Manual Download Page 6

Page: 6 / 75

Room Air Conditioner

Safety Precautions

■

Operation

Do not turn the air-conditioner ON or OFF by
plugging or unplugging the power plug.

Use a dedicated outlet for this appliance.

• There is risk of fire or electrical shock.

Grasp the plug to remove the cord from the
outlet. Do not touch it with wet hands.

Do not place a heater or other appliances near
the power cable.

• There is risk of fire or electrical shock.

• There is risk of fire and electric shock.

Do not allow water to run into electrical parts.

Do not store or use flammable gas or com-
bustibles near the air conditioner.

• There is risk of fire, failure of the product, or electric

shock.

• There is risk of fire or failure of product.

Thinner

Summary of Contents for AS-C306MSeries












































































Search results

Summary of Contents for AS-C306MSeries

Reviews:

Related manuals for AS-C306MSeries

Brands by name

Popular brands

LG AS-C306MSeries, Service Manual

Search results

Summary of Contents for AS-C306MSeries

Reviews:

Related manuals for AS-C306MSeries

Brands by name

Popular brands