- 27 -
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Part 2 Functions & Controls
6.6 Two Thermistor Control
There may be a significant difference between temperature taken at the installed product indoor temperature. Two ther-
mistor control provides option to control temperature by referring any of the two temperatures.
With help of the slide switch at the back of the wired remote controller, selection of the thermistor for controlling the unit
can be One thermistor is in the Indoor unit & the one is in the LCD wired remote.
■
Two Thermistor System
Function Code
Thermistor setting
Press button for 4 seconds
to enter the installer setting
mode until timer segment
display “01:01”.
1
Set Thermistor mode by pressing
button. (01: Remote Controller,
02: Indoor, 03: 2TH)
3
Press button to save or release.
4
Press button to exit or
system will automatically exit
after 25 seconds without any
input.
5
Repeat pressing button to select
Function code 04.
Ex) Setting Thermistor as '2TH'.
2
❊
Therefore system will use value that sensed from indoor unit or remote controller
<Thermistor Table>
Temperature sensor location
Function
01
Remote controller
Operation in remote controller Temperature sensor
02
Indoor unit
Operation in indoor unit temperature sensor
03
2-Thermistor(2TH)
Operation in lower temperature after comparing the temperature between the indoor
unit and remote controller
Summary of Contents for APNH2433LAD
Page 92: ...P NO MFL47149005 MARCH 2009 ...
