LG ABNH09GL1A2, Svc Manual

Page: 19 / 146

- 19 -
Copyright ©2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Category Functions
ABNW18GM1A0 [CM18 N14], ABNW24GM1A0 [CM24 N14]
ABNW30GM1A0 [UM30 N14], ABNW36GM2A0 [UM36 N24]
ABNW42GM2A0 [UM42 N24], ABNW48GM3A0 [UM48 N34]
ABNW60GM3A0 [UM60 N34]
Air flow
Air supply outlet 1
Airflow direction control (left & right) X
Airflow direction control (up & down) X
Auto swing (left & right) X
Auto swing (up & down) X
Airflow steps (fan/cool/heat) 3 / 3 / 3
Chaos wind(auto wind) X
Jet cool/heat X / X
Swirl wind X
Air purifying
Triple filter (Deodorizing) X
Plasma air purifier X
Allergy Safe filter X
Long-life prefilter (washable / anti-fungus) O
Installation
Drain pump ABDPG
E.S.P. control* O
Electric heater X
High ceiling operation* X
Auto Elevation Grille* X
Reliability
Hot start O
Self diagnosis O
Soft dry operation O
Convenience
Auto changeover** O
Auto cleaning X
Auto operation(artificial intelligence)** O
Auto Restart O
Child lock* O
Forced operation X
Group control* O
Sleep mode X
Timer(on/off) O
Timer(weekly)* O
Two thermistor control* O
Individual
control
Standard Wired remote controller O
Deluxe wired remote controller X
Simple wired remote controller X
Simple Wired remote controller(for hotel use) X
Wireless remote controller PQWRHQ0FDB
Network
function
General central controller (Non LGAP) X
Network Solution(LGAP) O
Dry contact PQDSA(1)/PQDSB(1) / PQDSBC
PI 485(for Indoor Unit) X
Special
function kit
Zone controller ABZCA
CTI(Communication transfer interface) X
Electronic thermostat X
Others
Remote temperature sensor PQRSTA0
Group control wrie PZCWRCG3
Telecom shelter controller X
Note
1. * : These functions need to connect the wired remote controller.
2. ** : Auto Changeover function can be operated when connected with Single A.
Auto Operation function can be operated whne connected with Mutli F/FDX.
3. Group control, Dry Contact, Auto Changeover functions are not available for units which are connected with synchro models.
O : Applied
X : Not applied
Accessory model name : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.