LG A9 Series Owner'S Manual Download Page 19

Page: 19 / 68

OPERATION

ENGLISH

Using the Mop Nozzle

Attach the water tank and mop pads to the

mop nozzle.

Press the

Water Adjustment

button to adjust

the amount of water.

Press the

Power

button to start cleaning.

Drying the Water Tank and Mop

Pads

Drying the Water Tank

When cleaning is completed, make sure to empty

the water tank and dry it before storing the mop

nozzle.

CAUTION

• Turn the water inlet caps to make sure they

remain open when storing the water tank. If the

caps are closed and the tank is not completely

dry, the trapped moisture can cause odors.

• Do not remove the water inlet caps from the

water tank. Caps may tear.

• Do not add detergent, vinegar or baking soda to

the water tank when washing. It is not easily

removed from the water tank, and may soil

floors.

• After cleaning, wipe off any remaining water

from the water supply inlet

on the mop nozzle

with a soft cloth. The water could drip onto the

floor and damage it.

• Do not pull or stretch the rubber gasket on the

water supply inlet. Doing so may tear or damage

it.

Open the 2 water inlet caps

on the sides of

the water tank and empty the water tank.

Shake the water tank to remove any

remaining water.

Leave the 2 water inlet caps open and allow

the water tank to dry in a well-ventilated area

out of direct sunlight for at least 24 hours.
• Only store the water tank once it is

completely empty and dry. Moisture or

residual water in the tank may cause odor.

Drying the Mop Pads

After using the mop pads, hand wash them and

allow them to dry before storing them.

CAUTION

• Follow these precautions to prevent mop pads

from becoming deformed.
- Do not use bleach or fabric softener when

washing the mop pads.

- Do not dry the pads in a clothes dryer.
- Do not boil the mop pads.

Separate the mop pads from the mop plates.

Hand wash the pads with a neutral detergent.

Set the pads in a well-ventilated area out of

direct sunlight for at least 24 hours or until

completely dry.
• Storing the mop pads before they are

completely dry may cause odors.

Summary of Contents for A9 Series





































































Search results

Summary of Contents for A9 Series

Reviews:

Related manuals for A9 Series

Brands by name

Popular brands

LG A9 Series, Owner'S Manual

Search results

Summary of Contents for A9 Series

Reviews:

Related manuals for A9 Series

Brands by name

Popular brands