LG A9 Series Owner'S Manual Download Page 50

Page: 50 / 68

INSTALLATION

FCC Notice

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment

and the receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Any changes or modifications in construction of

this device which are not expressly approved by

the party responsible for compliance could void

the user’s authority to operate the equipment.

Supplier’s Declaration of

Conformity

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two

conditions:
(1) This device may not cause harmful interference

and

(2) This device must accept any interference

received, including interference that may cause

undesired operation.

Model

EAC63382204

Voltage

DC 25.2 V

Capacity

2400 mA

Trade Name

Responsible Party

LG Electronics USA, Inc.

Address

111 Sylvan Avenue

North Building

Englewood Cliffs, NJ 07632

[email protected]

Summary of Contents for A9 Series





































































Search results

Summary of Contents for A9 Series

Reviews:

Related manuals for A9 Series

Brands by name

Popular brands

LG A9 Series, Owner'S Manual

Search results

Summary of Contents for A9 Series

Reviews:

Related manuals for A9 Series

Brands by name

Popular brands