LG A2UW18GFA0 Svc Manual Download Page 25

Page: 25 / 113

- 24 -

LGE Internal Use Only

Part 2 Functions & Controls

6.8 Sleep Timer Operation

• When the sleep time is reached after <1,2,3,4,5,6,7,0(cancel) hr> is input by the remote control while in appliance

operation, the operation of the appliance stops.

• While the appliance is on pause, the sleep timer mode cannot be input.

• While in cooling mode operation, 30 min later since the start of the sleep timer, the setting temperature increases by

1°C. After another 30 min elapse, it increases by 1°C again.

• When the sleep timer mode is input while in cooling cycle mode, the airflow speed of the indoor fan is set to the low.

• When the sleep timer mode is input while in heating cycle mode, the airflow speed of the indoor fan is set to the medi-

um.

6.9 Timer(On/Off)

6.9.1 On-Timer Operation

• When the set time is reached after the time is input by the remote control, the appliance starts to operate.

• The timer LED is on when the on-timer is input. It is off when the time set by the timer is reached.

• If the appliance is operating at the time set by the timer, the operation continues.

While in Fuzzy operation, the airflow speed of the indoor fan is automatically selected according to the temperature.

6.9.2 Off-Timer Operation

• When the set time is reached after the time is input by the remote control, the appliance stops operating.

• The timer LED is on when the off-timer is input. It is off when the time set by the timer is reached.

• If the appliance is on pause at the time set by the timer, the pause continues.

6.10 Weekly Program

• If necessary, an operator can make an On/Off reservation of the product for a period of one week.

- On/Off schedule of operation for a period of ONE week.

• No need to turn the unit On/OFF manually during working days.

On/Off time is scheduled in micom of the wired remote control.

Operation Time Table (Example)

Mon

Tue

Wed

Thu

Fri

Sat

Sun

OFF

Setting

Temp.

Off

25°C

25°C 25°C

25°C

09:00

12:00

08:00

17:00

09:00

12:00

08:00

12:00

09:00

12:00

Summary of Contents for A2UW18GFA0


















































































































Search results

Summary of Contents for A2UW18GFA0

Reviews:

Related manuals for A2UW18GFA0

Brands by name

Popular brands

LG A2UW18GFA0, Svc Manual

Search results

Summary of Contents for A2UW18GFA0

Reviews:

Related manuals for A2UW18GFA0

Brands by name

Popular brands