LG 55SM5KD-B User Manual Download Page 61

Page: 61 / 75

English

36. Check Tile Mode (Command: d z)

Checks the tile mode.

Transmission

[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Checks

Tile Mode

Acknowledgment

[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data 1 00:

Tile Mode

Off

01:

Tile Mode

Data 2 00 to 0F: tile column

Data 3 00 to 0F: tile row

* This feature may not be supported on some models.

37. Tile ID (Command: d i)

Sets the tile ID value of the product.

Transmission

[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1:

Tile ID

1 to 225

FF: Checks the

Tile ID

* The data value cannot exceed the value of row x column.

Acknowledgment

[i][ ][Set ID][ ][OK/NG][Data][x]

* If you enter a value that exceeds the value of row x column for

the Data parameter, Ack becomes NG.

* This feature may not be supported on some models.

38. Natural Mode (In Tile Mode) (Command: d j)

To display the image naturally, the part of the image that

would normally be displayed in the gap between the monitors

is omitted.

Transmission

[d][j][ ][Set ID][ ][Data][Cr]
Data 00:

Off

01:

Acknowledgment

[j][ ][Set ID][ ][OK/NG][Data][x]

* This feature may not be supported on some models.

39. Energy Saving Settings (Command: f j)

Sets the Display Power Management feature.

Transmission

[f][j][ ][Set ID][ ][Data][Cr]
Data 00:

Off

04:

1 minute

05:

3 minutes

06:

5 minutes

07:

10 minutes

Acknowledgment

[j][ ][Set ID][ ][OK/NG][Data][x]

* This feature may not be supported on some models.

40. Remote Control/Local Key Lock (Command: k m)

Adjusts the remote control/local key (front) lock.

Transmission

[k][m][ ][Set ID][ ][Data][Cr]
Data 00:

Off

(Lock Off)

01:

(Lock On)

* When the monitor is turned off, the power key works even in

On (01) mode.

Acknowledgment

[m][ ][Set ID][ ][OK/NG][Data][x]

* This feature may not be supported on some models.

41. Power On Delay (Command: f h)

Sets the schedule delay for when the power turns on (unit:

seconds).

Transmission

[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to FA: min. 0 to max. 250 (seconds)
Acknowledgment

[h][ ][Set ID][ ][OK/NG][Data][x]

* The maximum value may differ depending on the model.

Summary of Contents for 55SM5KD-B












































































Search results

Summary of Contents for 55SM5KD-B

Reviews:

Related manuals for 55SM5KD-B

Brands by name

Popular brands

LG 55SM5KD-B, User Manual

Search results

Summary of Contents for 55SM5KD-B

Reviews:

Related manuals for 55SM5KD-B

Brands by name

Popular brands