LG 55SM5KD-B User Manual Download Page 39

Page: 39 / 75

English

Group Manager 2.0

This feature enables you to group together multiple monitor sets on a single network into the same group and to

distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master

and Slave, and it can access the browser on your PC or mobile device.

Master

•

Add, edit, and delete group.

•

Clone your device's settings data.

•

Distribute

Schedules

and

Playlists

on a group basis.

•

All monitor sets initially come in Master mode.

Slave

•

Play

Schedules

and

Playlists

distributed in Master mode.

•

Remove monitor sets for their groups.

•

Monitor sets that have been added to a group are automatically switched to Slave mode. Conversely, when a monitor

set has been deleted from a group, it is automatically initialized and switched to Master mode.

•

You can duplicate the master device's setting data to the group by using

Data Cloning

•

You can re-download the content distributed to the group by using

Sync

Summary of Contents for 55SM5KD-B












































































Search results

Summary of Contents for 55SM5KD-B

Reviews:

Related manuals for 55SM5KD-B

Brands by name

Popular brands

LG 55SM5KD-B, User Manual

Search results

Summary of Contents for 55SM5KD-B

Reviews:

Related manuals for 55SM5KD-B

Brands by name

Popular brands