LG 55SM5KD-B User Manual Download Page 24

Page: 24 / 75

English

Aspect Ratio

Display Aspect Ratio

This feature enables you to change the picture size to view the picture at its optimal resolution.

•

Full Wide

: Stretch the picture to fill the screen.

•

Original

: Display the picture at its original resolution.

Rotation

Display Rotation

Screen Rotation

•

This feature rotates the screen clockwise.

•

You can set this feature to Off/90/180/270.

•

When set to off, this feature is deactivated.

•

It is recommended that you use content designed to be used in Portrait mode.

External Input Rotation

•

This feature rotates the externally inputted picture 90, 180, or 270 degrees clockwise.

•

When this feature is set to On (90 or 270 degrees), as for ARC, the picture is resized to be

Full Wide

•

External Input Rotation

is enabled during WiDi operation, the position of the mouse cursor may not be displayed

accurately.

•

Please note that the degradation of picture quality that occurs when you have enabled

External Input Rotation

during the use of external input has nothing to do with the product itself.

•

When External Input Rotation is set to On, Multi Screen's PIP mode is disabled.

•

If External Input Rotation is enabled on models that support touch, touch may not work properly.

Summary of Contents for 55SM5KD-B












































































Search results

Summary of Contents for 55SM5KD-B

Reviews:

Related manuals for 55SM5KD-B

Brands by name

Popular brands

LG 55SM5KD-B, User Manual

Search results

Summary of Contents for 55SM5KD-B

Reviews:

Related manuals for 55SM5KD-B

Brands by name

Popular brands