A-28
PREPARATION
PR
EP
AR
AT
IO
N
■
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
■
The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
2
■
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
■
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
■
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
Use a sturdy rope to tie the product for alignment.
It is safer to tie the rope so it becomes horizontal
between the wall and the product.
2
1
1
1
2
3
NOTE
►
When moving the TV undo the cords first.
►
Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
►
To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the
same.
CAREFUL INSTALLATION
ADVICE
DESKTOP PEDESTAL
INSTALLATION
Summary of Contents for 22LD350-TA
Page 241: ......
