A-27
PR
EP
AR
AT
IO
N
DC IN
■
This feature is not available for all models.
■
Image shown may differ from your TV.
CABLE MANAGEMENT
AC IN
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
NOTE
►
The Kensington Security System is an
optional accessory.
►
If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on.
►
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor's performance.
►
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary dis-
tortion effects on the screen.
Place the ring spacers on the set before
installing the wall mounting bracket so that
the inclination of the backside of the set can
be adjusted perpendicularly.
< Only 26LE5*** >
4-Ring spacers
■
Image shown may differ from your TV.
■
Image shown may differ from your TV.
1
2
3
Connect the antenna cable to the antenna
input port on the TV.
Connect the AC/DC adapter plug to the
power input jack on the TV.
Connect the power cord to the AC/DC
adapter first, then plug the power cord into
the wall power outlet.
CAUTION
►
Please be sure to connect the TV to the DC
power adapter before connecting the TV's
power plug to a wall power outlet.
AC/DC Adaptor
(Only 22/26LE5***, 22/26LE6***)
CONNECTION OF TV
KENSINGTON SECURITY
SYSTEM
Summary of Contents for 22LD350-TA
Page 241: ......
