13
EN
Stacking Mini Washer
Stacking holder
Bracket (Front)
Bracket (Back)
Bracket
(Front)
Bracket
(Back)
Stacking holder
1
Tilt Main Washer.
2
Assemble the bracket (front) and stacking
holder at the bottom of Main Washer.
3
Pull and save the foam block for future use.
If Mini Washer must be moved in the future,
the foam block will help prevent damage to
Mini Washer during transportation.
NOTE
•
To prevent damage, do not remove the
foam block until Mini Washer is at the final
location.
4
Turn the top cover about 180 degrees.
Cover the upper hole with the top cover and
install 4 short screws to fix it in place.
5
Place the bracket (back) on the back side of
Mini Washer and assemble with each of the
4 screws.
