38
EN
Symptoms
Reason
Solution
Washing machine
will not operate.
Control panel has powered off
due to inactivity.
•
This is normal. Press the
Power
button to
turn the washing machine on.
Washing machine is
unplugged.
•
Make sure cord is plugged securely into a
working outlet.
Water supply is turned off.
•
Turn both hot and cold taps fully on.
Controls are not set properly.
•
Make sure the cycle was set correctly,
close the door and press the
Start/Pause
button.
Door or drawer is open.
•
Close the door and drawer make sure
that nothing is caught under the door
preventing it from closing completely.
Circuit breaker/fuse is
tripped/blown.
•
Check house circuit breakers/fuses.
Replace fuses or reset breaker. The
washing machine should be on a
dedicated branch circuit. The washing
machine will resume the cycle where it
stopped once power is restored.
Control needs to be reset.
•
Press the
Power
button, then re-select
the desired programme and press the
Start/Pause
button.
Start/Pause was not pressed
after a cycle was set.
•
Press the
Start/Pause
button with control
panel of Main Washer or remote control
after closing the drawer.
•
When using the control panel of Main
Washer, press the
Start/Pause
button
and close the drawer within 5 seconds.
Extremely low water pressure.
•
Check another tap in the house to make
sure that household water pressure is
adequate.
Washing machine is too cold.
•
If the washing machine has been exposed
to temperatures below freezing for an
extended period of time, allow it to warm
up before pressing the
Power
button.
