14
EN
6
Place Main Washer on top of Mini Washer.
•
Make sure the 4 legs are totally locked and
the holes of Mini Washer align with the
holes of Main Washer.
Washer leg
Washer leg
7
Install the 14 long screws at each corner
to securely attach Main Washer to Mini
Washer.
•
First, insert screws on each side. Then
insert screws on the front and back side.
NOTE
•
It can be difficult to assemble if it is not
assembled in the proper order.
1
1
2
3
8
Turn the feet of Main Washer slightly until it
is snugged up against Mini Washer.
WARNING
•
Mini Washer will not work as a standalone unit.
Connecting the Supply Hose
•
Water supply pressure must be between 0.1
MPa and 0.8 MPa (1.0‒8.0 kgf/cm
2
).
•
Do not strip or crossthread when connecting
supply hose to the valve.
•
If the water supply pressure is more than
0.8 MPa, a decompression device should be
installed.
•
Periodically check the condition of the hose
and replace the hose if necessary.
•
Contact the service centre if there is no rubber
seal.
Checking the Rubber Seal on the
Supply Hose
Two rubber seals are supplied with the water
supply hoses. They are used for preventing
water leaks. Make sure the connection to taps is
sufficiently tight.
Hose connector
Rubber seal
Hose connector
Rubber seal
