Ⅵ
.Programming Features
43
6.5.7 Keypad Lock
This function is to prevent from pressing any key unconsciously. In keypad lock mode, when a
user receives a call, the mode is changed to the key-unlock mode automatically. When hanged
up a call, the mode is returned to the keypad lock mode. A user can only receive an incoming
call in this mode.
1) This function is set to ENABLE or DISABLE by Keypad Lock setting operation in Phone
Setting Menu. The initial state is Unlock. Once this function is set to ENABLE, any key
operation is not available except Unlock soft key. While setting this function, a user can
receive a call if there is an incoming call.
2) You can also set Keypad Lock to enable by pressing button in standby mode
directly.
When key lock mode is set, “Keypad Locked” is displayed on the LCD and all keys can’t be
entered except for key-unlock procedure.
1) To release the locked key, press
Unlock
( ) button
and OK
( ) button.
6.5.8 S/W Version
Selecting this sub-menu displays current software version on the LCD.
6.5.9 Edit Co Code
A user can edit 4 CO access codes for each system.
This means CODE-1 is for Base 1, CODE-2 is for Base 2 and CODE-4 is for Base 4. It is used
when you select CO code to “yes” in phonebook. In the case of “yes”, you need not insert CO
access code like ‘0’ in a telephone number. Automatically, this code number will be added for
outgoing call.
6.6 Direct Call
Emergency call is named. In set up mode, number is transmitted input any key.
1) Select Direct Call and press the
OK
( ) button.
2) Change the Direct call setting between Yes and No with the
LEFT/RIGHT
( )
buttons, and then press the
OK
( ) button.
3) If you select Yes, you can change the direct phone number, and then press the
OK
( ) button.
