Ⅳ
.
BASIC FUNCTIONS
25
the
Find
( ) button, all phonebook names are displayed, and then you can select the
desired name by pressing the
UP/DOWN
( )
buttons.
7) Press
the
Call
( ) button to dial the telephone number, if you find the desired name.
Another method is as the below.
8) Press
the
DOWN
( )button, then the names in the phonebook list are displayed.
9) Select the desired name and press the button to dial that number.
4.3 Placing an Outside Call
4.3.1 Pre Dial
1) ipLDK-24/100
CO Line Access Code (9, 8+XX or 88+XX)
→
Phone Number
→
→
Connection
2) ipLDK-300/300E
CO Line Access Code (9, 8+XX or 88+XXX)
→
Phone Number
→
→
Connection
You may dial telephone number in an idle state before pressing button (up to 24 digits).
Since it is displayed only 11 digits per line on the LCD. If you dial a wrong digit, a user can erase
last 1 digit by pressing Delete ( ) button once and if you want to erase all digit dialed, press
Delete ( ) button for longer than 1 second. If you want to insert dialing pause among dial
numbers, press “Option” button and select “Insert Pause”. Then “P” is displayed on the LCD.
Dial phone number.
Press
TALK
( ) button.
Phone(
) icon is displayed on the LCD.
The LCD message is displayed as the left figure and connection tone is heard when
connection is completed.
Note
You can insert dialing pause pressing “#” button longer then 1 second in both pre dialing
and post dialing
