Ⅱ
.Phone Overview
18
2.3 LCD Display
The LCD of GDC-400H GAP has 128 x 128 pixels that are capable to display 10 icons and 7
lines x 18 characters per line. The LCD shows different wireless states and displays visual
feedback for the actions performed by user.
Icon
Description
[Antenna Icon
& RSSI Icon
]
The terminal is locked to a base station and the location
registration is finished.
Location registration is finished. Even though user may make a
call or receive a call, may hear very severe noise. (Below –86dBm)
User may make a call or receive a call and the may hear some
noise. (-85dBm~-80dBm)
User may make a call or receive a call and the call quality is
normal. (-79dBm~-70dBm)
User may make a call or receive a call and the call quality is good.
(Upper -69dBm)
[PHONE Icon]
Indicates that a traffic channel is established.
/
[EXTERNAL/INTERNAL CALL ICON]
Indicates that the call is from and to where. EXT is external and INT is internal.
[Manner MODE ICON]
Indicates that the phone mode is manner mode. In manner mode, all sound is
disabled and ring is replaced by vibration.
[MESSAGE ICON]
The icon indicates that the system has at least one new message for the wireless
terminal. The message information is updated every 3 minute. The disconnection
with the subscribed system makes impossible to update the message information
and the icon is disappeared. And if the wireless terminal is connected with the
system, this icon is displayed again on the LCD. If the station message is left, the
reserved call is made by using
CALLBACK
button and this icon will be
disappeared after the call. In case of voice message through VMIB, press
FLASH
button to delete a message after checking the message. When all
messages are deleted, the message icon will be disappeared. Otherwise, this
icon will be still remained. Applicable message: VMIB message, CLI message,
Station message.
[KEY LOCK ICON]
Indicates that the phone is set to key lock mode.
[Alarm clock ICON]
Indicates that an alarm clock is set.
