Lexus RX 350, Manual

Page: 209 / 328

209
7-1. Lexus parking assist monitor
7
Peri
pheral
moni
toring system
If you notice any of the following symptoms, refer to the likely cause and the solu-
tion, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected by your
Lexus dealer.
Things you should know
If you notice any symptoms
Symptom Likely cause Solution
The image is difficult to see

The vehicle is in a dark area

The temperature around
the lens is either high or low

The outside temperature is
low

There are water droplets
on the camera

It is raining or humid

Foreign matter (mud etc.) is
adhering to the camera

Sunlight or headlights are
shining directly into the
camera

The vehicle is under fluo-
rescent lights, sodium
lights, mercury lights etc.
Back up while visually check-
ing the vehicle’s surroundings.
(Use the monitor again once
conditions have been
improved.)
The procedure for adjusting
the picture quality of the
parking assist monitor is the
same as the procedure for
adjusting the screen display.
(

P.70)
The image is blurry
Dirt or foreign matter (such
as water droplets, snow, mud
etc.) is adhering to the cam-
era. Flush the camera with a large
quantity of water and wipe
the camera lens clean with a
soft and wet cloth.
The image is out of align-
ment
The camera or surrounding
area has received a strong
impact.
Have the vehicle inspected by
your Lexus dealer.
The guide lines are very far
out of alignment
The camera position is out of
alignment. Have the vehicle inspected by
your Lexus dealer.

The vehicle is tilted (there is
a heavy load on the vehicle,
tire pressure is low due to a
tire puncture, etc.)

The vehicle is used on an
incline.
If this happens due to these
causes, it does not indicate a
malfunction.
Back up while visually check-
ing the vehicle’s surroundings.