Lexus RX 350, Manual

Page: 240 / 328

240
7-2. Panoramic view monitor
The cameras for the panoramic view
monitor are located as shown in the
illustrations.

Front camera

Side cameras

Rear camera
If dirt or foreign matter (such as water
droplets, snow, mud, etc.) is adhering
to the camera, it cannot transmit a
clear image. In this case, flush it with a
large quantity of water and wipe the
camera lens clean with a soft and wet
cloth.
The camera Using the camera
NOTICE
● The panoramic view monitor may not
operate properly in the following
cases.
• If the camera is hit, the position and
mounting angle of the camera may
change.
• As the camera has a water proof con-
struction, do not detach, disassemble
or modify it. This may cause incorrect
operation.
• When cleaning the camera lens, flush
the camera with a large quantity of
water and wipe it with a soft and wet
cloth. Strongly rubbing the camera
lens may cause the camera lens to be
scratched and unable to transmit a
clear image.
• Do not allow an organic solvent, car
wax, window cleaner or a glass coating
to adhere to the camera. If this hap-
pens, wipe it off as soon as possible.
• If the temperature changes rapidly,
such as when hot water is poured on
the vehicle in cold weather, the system
may not operate normally.
• When washing the vehicle, do not
apply intensive bursts of water to the
camera or camera area. Doing so may
result in the camera malfunctioning.
● Do not expose the camera to strong
impacts as this could cause a malfunc-
tion. If this happens, have the vehicle
inspected by your Lexus dealer as
soon as possible.