Lexmark XM1135 User Manual Download Page 231

Page: 231 / 261

Action

Yes

Step 2

Select a lower scan resolution.

Does scanning still take too long or freeze the computer?

Contact

customer

support

The problem is solved.

Poor scanned image quality

Action

Yes

Step 1

Check if an error message appears on the display.

Is there an error message on the printer display?

Clear the error
message.

Go to step 2.

Step 2

Check the quality of the original document.

Is the quality of the original document satisfactory?

Go to step 3.

Increase the scan
resolution settings for a
higher

‑

quality output.

Step 3

Clean the scanner glass and the ADF glass using a clean, lint

‑

free cloth

dampened with water.

Is the scanner glass clean?

Go to step 4.

See

“Cleaning the

scanner glass” on
page 152

Step 4

Check the placement of the document or photo.

Make sure the document or photo is loaded facedown on the scanner
glass in the upper left corner.

Is the document or photo loaded correctly?

Go to step 5.

Place the document or
photo facedown on the
scanner glass in the
upper left corner.

Step 5

Send a print job, and then check for print quality problems.

•

From the General Settings menu, adjust the Eco

‑

Mode settings.

•

From the Copy menu, adjust the Darkness setting.

•

When the print becomes faded, replace the toner cartridge.

Is the print quality satisfactory?

Go to step 6.

See

“Print quality

problems” on
page 201

Step 6

Check the scan settings.

From the Scan screen, make sure the Content Type and Content Source
settings are correct for the document being scanned.

Are the Content Type and Content Source settings correct for the
document being scanned?

Go to step 7.

Change the Content
Type and Content
Source settings to
match the document
being scanned.

Troubleshooting

231

Summary of Contents for XM1135






































































































































































































































































Search results

Summary of Contents for XM1135

Reviews:

Related manuals for XM1135

Brands by name

Popular brands

Lexmark XM1135, User Manual

Search results

Summary of Contents for XM1135

Reviews:

Related manuals for XM1135

Brands by name

Popular brands