Lexmark XM1135 User Manual Download Page 194

Page: 194 / 261

Paper feed problems

Jammed pages are not reprinted

Action

Yes

Turn on jam recovery.

From the printer control panel, navigate to:

Settings

General Settings

Print Recovery

Jam Recovery

Select

Auto

Depending on your printer model, press

or touch

Submit

Resend the pages that did not print.

Were the jammed pages reprinted?

The problem is solved. Contact

customer

support

Paper frequently jams

Action

Yes

Step 1

Pull out the tray, and then do one or more of the following:

•

Make sure paper lies flat in the tray.

•

Check if the paper size indicators on the paper guides are aligned
with the paper size indicators on the tray.

•

Check if the paper guides are aligned against the edges of the
paper.

•

Make sure the paper is below the maximum paper fill indicator.

•

Check if you are printing on a recommended paper size and type.

Insert the tray properly.

If jam recovery is enabled, then the print jobs will reprint
automatically.

Do paper jams still occur frequently?

Go to step 2.

The problem is solved.

Step 2

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store paper in

its original wrapper until you use it.

Resend the print job.

Do paper jams still occur frequently?

Go to step 3.

The problem is solved.

Step 3

Review the tips on avoiding jams. For more information, see

“Avoiding

jams” on page 164

Follow the recommendations, and then resend the print job.

Do paper jams still occur frequently?

Contact

customer

support

The problem is solved.

Troubleshooting

194

Summary of Contents for XM1135






































































































































































































































































Search results

Summary of Contents for XM1135

Reviews:

Related manuals for XM1135

Brands by name

Popular brands

Lexmark XM1135, User Manual

Search results

Summary of Contents for XM1135

Reviews:

Related manuals for XM1135

Brands by name

Popular brands