Lexmark XM1135 User Manual Download Page 105

Page: 105 / 261

Use

View Card Status

Connected
Disconnected

View the connection status of the wireless network adapter.

View Card Speed

View the speed of an active wireless network adapter.

Network Address

UAA
LAA

View the network addresses.

Job Timeout

0, 10–225 seconds

Set the amount of time it takes for a network print job to be canceled.

Notes:

•

“90 seconds” is the factory default setting.

•

A setting value of 0 disables the timeout.

•

If a value between 1 and 9 is selected, then

Invalid

appears on the

display, and the value is not saved.

Banner Page

Off
On

Allow the printer to print a banner page.

Note:

Off is the factory default setting.

TCP/IP menu

To access the menu, navigate to either of the following:

•

Network/Ports

Standard Network

Standard Network Setup

TCP/IP

•

Network/Ports

Network [x]

Network [x] Setup

TCP/IP

Note:

This menu is available only in network printers or printers attached to print servers.

Use

Set Hostname

Set the current TCP/IP host name.

Note:

This can be changed only from the Embedded Web Server.

IP Address

View or change the current TCP/IP address.

Note:

Manually setting the IP address sets the Enable DHCP and Enable Auto IP

settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.

Netmask

View or change the current TCP/IP netmask.

Gateway

View or change the current TCP/IP gateway.

Enable DHCP

On
Off

Specify the DHCP address and parameter assignment.

Note:

On is the factory default setting.

Enable RARP

On
Off

Specify the RARP address assignment setting.

Note:

Off is the factory default setting.

Understanding the printer menus

105

Summary of Contents for XM1135






































































































































































































































































Search results

Summary of Contents for XM1135

Reviews:

Related manuals for XM1135

Brands by name

Popular brands

Lexmark XM1135, User Manual

Search results

Summary of Contents for XM1135

Reviews:

Related manuals for XM1135

Brands by name

Popular brands