Lexmark Optra Color 1200, Service Manual

Page: 108 / 245

Diagnostic Aids
3-23
5050-001
Setting the Page Count
The printer’s page count can be changed via the Diagnostics menus.
This menu is used by the service technician to reset the Page Count
setting whenever the engine card is replaced. The engine card
contains the printer’s NVRAM memory. When
Page Count is
selected from the PRINTER SETUP menu, the current page count is
displayed as follows:
The leftmost digit (‘1’ in this example) will blink, indicating it is the
first digit to be changed. To change the value, press either Menu> or
Menu< until the value you want is displayed. Press Select to move to
the next digit. The next digit (‘2’ in this example) will blink. Continue
modifying each digit using this method. To skip a digit (and keep its
current value), press Select.
When Select is pressed after the final digit (‘7’ in this example), the
new page count is stored in NVRAM.
Viewing the Permanent Page Count
The permanent page count setting cannot be modified using the
operator panel. It can only be viewed using the Diagnostics menus.
When Permanent Page Count is selected, the following screen is
displayed.
Viewing and Resetting the Drum Counters
The drum counters increment when a page is printed. The drum
counter for a particular plane only increments if that color is printed.
It increments by 1 for Letter, A4, A5, B5 and envelopes. It increments
by 1.2 for Legal and B4. It increments by 2 for 11 x 17 and A3. The
counters are used to track printer usage.
Page Count
=1234567*
Perm Page Count
=1234567*