Maintenance kit nearly low [80.xy]
For more information, visit the Lexmark support Web site at
or contact customer
support, and then report the message.
If necessary, touch
Continue
to clear the message and continue printing.
Maintenance kit very low, [x] estimated pages remain [80.xy]
You may need to replace the maintenance kit very soon. For more information, visit the Lexmark support
Web site at
or contact customer support, and then report the message.
If necessary, touch
Continue
to clear the message and continue printing.
Memory full [38]
Try one or more of the following:
•
From the printer control panel, touch
Cancel job
to clear the message.
•
Install additional printer memory.
Memory full, cannot print faxes
From the control panel, do either of the following:
•
Touch
Continue holding faxes without printing
to clear the message.
•
Touch
Attempt to print
to restart the printer and continue printing.
Misfeed cleared, extra sheets in output bin [24y.xx]
Select
Continue
on the printer control panel to clear the message and continue printing.
Note:
To reduce misfeeds, make sure that media is fanned and loaded properly.
Network [x] software error [54]
Try one or more of the following:
•
From the printer control panel, touch
Continue
to continue printing.
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or print server. For more information, visit the Lexmark
support Web site at
No analog phone line connected to modem, fax is disabled.
Connect the printer to an analog phone line.
Non
‑
Lexmark [supply type], see User’s Guide [33.xy]
Note:
The supply type can be toner cartridge or imaging unit.
Troubleshooting
275
