Maintaining the printer
Warning—Potential Damage:
Failure to maintain optimum printer performance, or to replace parts and
supplies, may cause damage to your printer.
Adjusting the speaker volume
Adjusting the default internal speaker volume
The speaker volume will reset to default value after the session is logged out, when the printer wakes from
Sleep or Hibernate mode, or after a power
‑
on reset.
1
From the control panel, navigate to:
Settings
>
Device
>
Preferences
>
Audio Feedback
2
Select the volume.
Note:
If Quiet Mode is enabled, then audible alerts are turned off.
Adjusting the default headphones volume
Headphones volume will reset to default value after the session is logged out, when the printer wakes from
Sleep or Hibernate mode, or after a power
‑
on reset.
1
From the control panel, select
Settings
>
Device
>
Accessibility
>
Headphone Volume
.
2
Select the volume.
Networking
Note:
For information on installing the wireless network adapter, see the setup sheet that came with the
adapter.
Connecting the printer to a Wi
‑
Fi network
1
From the printer control panel, navigate to:
Settings
>
Network/Ports
>
Wireless
For non-touch-screen printer models, press
to navigate through the settings.
2
Select
Setup On Printer Panel
and then follow the instructions on the display.
Note:
For Wi
‑
Fi
‑
network
‑
ready printer models, a prompt for Wi
‑
Fi network setup appears during initial setup.
Maintaining the printer
98
Summary of Contents for M5255
Page 107: ...2 Remove the toner cartridge 3 Remove the used imaging unit Maintaining the printer 107 ...
Page 118: ...2 Remove the used pick roller 3 Unpack the new pick roller Maintaining the printer 118 ...
Page 119: ...4 Install the new pick roller 5 Close the multipurpose feeder Maintaining the printer 119 ...
Page 141: ...2 Remove the staple cartridge holder 3 Remove the loose staples Clearing jams 141 ...
