Lexmark M3250, User Manual

Page: 122 / 187

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your
printer, from the control panel, press and hold
X and # simultaneously for 15 seconds.
If you do not want to accept these risks, then remove the third-party supply or part from your printer and
install a genuine Lexmark supply or part. For more information, see
“Using genuine Lexmark parts and
supplies” on page 89 .
If the printer does not print after pressing and holding X and # simultaneously for 15 seconds, then reset
the supply usage counter.
1
From the control panel, navigate to:
Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters
2
Select the part or supply that you want to reset, and then select Start .
3
Read the warning message, and then select Continue .
4
Press and hold X and # simultaneously for 15 seconds to clear the message.
Note: If you are unable to reset the supply usage counters, then return the item to the place of
purchase.
Paper feed problems
Envelope seals when printing
Action Yes No
1
Use envelopes that have been stored in a dry environment.
Note: Printing on envelopes with high moisture content can seal the
flaps.
2
Resend the print job.
Does the envelope seal when printing?
Contact
customer
support
.
The problem is
solved.
Collated printing does not work
Action Yes No
Step 1
a
From the printer control panel, navigate to:
Settings > Print > Layout > Collate
For non-touch-screen printer models, press to navigate
through the settings.
b
Set Collate to On .
c
Print the document.
Are the pages collated correctly?
The problem is
solved. Go to step 2.
Troubleshooting 122