Lexmark M3250 User Manual Download

Page: 55 / 187

Menu item

Description

Font Priority

Resident*

Flash/Disk

Establish the font search order.

Notes:

•

Resident sets the printer to search its memory for the requested font
before searching ﬂash memory or hard disk.

•

Flash/Disk sets the printer to search the ﬂash memory or printer hard
disk for the requested font before searching printer memory.

•

This menu item appears only when a ﬂash memory or printer hard
disk is installed.

Wait Timeout

Off

On*

Set the printer to wait for additional data before canceling a print job.

Note:

When set to On, 40 seconds is the factory default setting.

Note:

An asterisk (*) next to a value indicates the factory default setting.

PCL

Menu item

Description

Font Source

Resident*

Disk

Download

Flash

All

Specify the source of the fonts that are displayed in the Font Name menu
item.

Note:

Make sure that the hard disk and ﬂash option are not

password

‑

protected.

Font Name

[List of available fonts]

Choose a font from the speciﬁed font source.

Notes:

•

Courier is the factory default setting.

•

The available fonts may vary depending on your printer model.

Symbol Set

[List of available symbol set]

Specify the symbol set for each font name.

Notes:

•

10U PC

‑

8 is the U.S. factory default setting. 12U PC

‑

850 is the

international factory default setting.

•

A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or speciﬁc programs such as math symbols for scientiﬁc
text.

•

The available symbol sets may vary depending on your printer model.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for M3250




























































































































































































Search results

Summary of Contents for M3250

Reviews:

Related manuals for M3250

Brands by name

Popular brands

Lexmark M3250, User Manual

Search results

Summary of Contents for M3250

Reviews:

Related manuals for M3250

Brands by name

Popular brands