Notes:
•
The x and y values represent .
xy
in the error code that appears on the printer control panel.
•
The x and y values must match for printing to continue.
Replace [type] imaging kit, 0 estimated pages remain [84.xy]
Note:
The type can be a black imaging kit, or a black and color imaging kit.
Replace the indicated imaging kit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply.
Note:
If you do not have a replacement imaging kit, then see the “Ordering supplies” section of the
User’s Guide
or
visit
www.lexmark.com
.
Replace all originals if restarting job.
From the printer control panel, try one or more of the following:
•
Select
Scan from automatic feeder
, and then press
to continue scanning from the ADF immediately after the
last successful scan job.
•
Select
Scan from flatbed
, and then press
to continue scanning from the scanner glass immediately after the
last successful scan job.
•
Select
Finish job without further scanning
, and then press
to end the last successful scan job.
Note:
This does not cancel the scan job. All successfully scanned pages will be processed further for copying or
e-mailing.
•
Select
Restart Job
, and then press
to restart the scan job with the same settings from the previous scan job.
•
Select
Cancel Job
, and then press
to clear the message and cancel the scan job.
Remove defective disk [61]
Remove and replace the defective printer hard disk.
Replace defective [color] cartridge [31.xy]
Replace the defective toner cartridge to clear the message. For more information, see the instruction sheet that came
with the supply.
Note:
If you do not have a replacement toner cartridge, then see the “Ordering supplies” section of the
User’s Guide
or visit
www.lexmark.com
.
Replace defective [type] imaging kit [31.xy]
Note:
The type can be a black imaging kit, or a black and color imaging kit.
Replace the defective imaging kit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply.
Troubleshooting
267
