Faxing information
34
Printing, copying, faxing, and scanning
Specify content
To specify the type of content on your original document, use the navigation arrow buttons to
highlight
Options
, and then press
✓
. Press the down arrow until
Content
is highlighted. Press the
left or right arrow to choose the content type that matches your original document. Choose among
Text/Graphics
,
Photo
, and
Text
.
Set darkness
To adjust the darkness of your faxes, use the navigation arrow buttons to highlight
Options
, and then
press
✓
. Press the down arrow until
Darkness
is highlighted. Press the right arrow to increase the
darkness or the left arrow to decrease the darkness.
Manual Fax
If your MFP shares a phone line with a telephone through the use of a line splitter, you can use
manual fax to begin sending or receiving faxes after beginning a phone call.
To enter manual fax mode, press Fax. Highlight
Options
and press
✓
. Highlight
Manual Fax
and
press
✓
.
You can also begin manual fax by pressing # and then 0 from the Home screen.
Within manual fax:
•
Highlight
Begin Scanning
and press
✓
to scan and transmit a single page on the scanner
flatbed, or all scan media loaded in the scanner ADF.
•
Highlight
Prescan
and press
✓
to scan multiple originals one at a time on the scanner
flatbed. Highlight
Scan Next Page
and press
✓
to scan each new page, and then highlight
Done
and press
✓
to transmit all pages.
•
Highlight
Begin Receiving
and press
✓
to begin receiving an incoming fax.
Examples of typical fax jobs
Job 1: one page
1
Place the document face down on the scanner flatbed or face up in the ADF.
2
Press Fax.
3
Enter the fax recipient phone number on the numeric keypad.
4
Press Start.