manualshive.com logo in svg

Lexmark 16L0000 - X 422 MFP B/W Laser, User Reference Manual, Page: 230 / 250

Share
Download
Lexmark 16L0000 - X 422 MFP B/W Laser User Reference Manual Download Page 230

MFP messages

230

Understanding the MFP control panel messages

Defragmenting Flash

DO NOT POWER OFF

The MFP is defragmenting the 
flash memory to reclaim storage 
space occupied by deleted 
resources.

Wait for the message to clear. No button 
actions are possible while this message is 
displayed.

Do not turn the MFP off while this 
message is displayed.

Device must be in 
Ready state before 
accessing 
administration menus.

A currently processing operation 
must finish before the 
administration menus are 
available.

Wait for the device to enter 

Ready

 mode.

Dialing <number>

The device is dialing a fax 
recipient.

No action required.

E-mail turned off by 
system administrator

The e-mail function is not currently 
available.

See your support person.

Fax already in 
progress

This message is displayed if you 
try to begin a manual fax job while 
a queued fax job is already in 
progress.

Wait for the current fax job to finish.

Fax Failed

After a set number of unsuccessful 
attempts to send a fax job, a Fax 
Failed log sheet may print and the 
fax job is canceled.

Verify the number of your fax recipient.

Fax turned off by 
system administrator

The fax function is not currently 
available.

See your support person.

Flushing Buffer

The MFP is flushing corrupted print 
data and discarding the current 
print job.

Wait for the message to clear.

Formatting Fax Flash

The device is formatting the fax 
flash memory.

Wait for the message to clear. No button 
actions are possible while this message is 
displayed.

Do not turn the MFP off while this 
message is displayed.

Formatting Flash

DO NOT POWER OFF

The MFP is formatting the flash 
memory.

Wait for the message to clear.

Do not turn the MFP off while this 
message is displayed.

FTP disabled by system 
administrator.

The FTP function is turned off.

See your support person.

Incompatible settings 
selected.

<setting> modified.

Incompatible settings were 
selected. Whichever of these 
settings was turned on last is kept.

No action required.

Insert Tray 1

The tray is either missing or not 
fully inserted.

Insert the specified tray completely.

Message

What this message means

What you can do

Summary of Contents for 16L0000 - X 422 MFP B/W Laser



























































































































































































































































Reviews:

No comments