Lexicon
Learning to Use NuVerb
24
24
To Cut a Program
Select a program by clicking on it, then select
Cut
from the
File
menu. The highlighted program
is removed. Cut programs can be pasted into another location within the same library, or into
another library. The program will be saved on the clipboard until another
Cut
or
Copy
command overwrites it.
Cutting, Copying , and Pasting Multiple Programs
The selection of multiple programs for cutting or copying to a library is accomplished by using
either the
shift
or the Command key as follows:
The
shift
key: To select a group of adjacent programs, click on the first program in the group.
Then press and hold the
shift
key while selecting the last program in the group. All of the
programs between the first program selected and the second will be highlighted.
The Command key: To add a non-adjacent program to a highlighted group, hold down the
Command key while clicking on the program you want to add.
Programs pasted from the clipboard are inserted above any program which is highlighted. If
no program in the list is highlighted, programs are inserted at the end of the list. The original
order of multiple programs is maintained when they are cut, copied, or pasted.
