Lexicon CORE2, Service Manual

Page: 30 / 86

Lexicon Studio Core2 Service Manual
5-4
Cubase issues:
Addendum #5: ROUTING IN CUBASE
Addendum #6: PUNCH ROUTING IN CUBASE
Addendum #7: CLOCK SOURCE CONSISTENCY IN CUBASE
Wave (Multimedia I/O) issues:
Addendum #8: THE EFFECT OF ROUTING CHANGES ON WAVE
DRIVERS
Addendum #9: SELECTION OF WINDOWS SOUNDS
Addendum #10: CLOCK SOURCE SELECTION IN MMIO
Addendum #11: MMIO BUS ALIGNMENT IN ACID AND COOL
EDIT PRO
Samplitude issues:
Addendum #12: NOISES THAT OCCUR AFTER SHUTDOWN OF
SAMPLITUDE
Other issues:
Addendum #13: S/PDIF EFFECTS LOOP
In addition, at the end of this file there is a list of errors in the
User's Manual that were detected at the last minute.
=====================================================================
Addendum #1: NEW USER INTERFACE FEATURES
<MESSAGES>
A message will warn the user that undesirable noise could occur if
input channels are opened from an audio group that does not conform
to the selected clock source.
Example: S/PDIF inputs routed with an Internal clock source will
cause a warning message to appear.
NOTE: clock source warning message will appear based on the currently
open input channels, regardless of which channels are currently
routed (an open input channel is a channel playing audio). When the
monitor button is active, however, all routed channels are open, and
not just those channels selected for punch. Therefore, you might
receive a warning message that pertains to input channels that you do
not actually intend to use, just because the monitor button is
selected.
<GREEN LEDS & CHECKBOX OPTIONS>
Indicate whether or not there is a valid clock source and sample
rate. The two check boxes allow the user the option to turn on/off
the pop-up messages about lost and regained word clock, as well as
changes in the sample rate (which is now displayed for the user's
reference). The messages are there purely for the user's convenience.
Core-2 will lock and change sample-rates without the user hitting OK.
<CLOCK SOURCE LIST>
Certain clock source selections will not be available based on the
current I/O routing.