Leviton Z-MAX r24sd, User Manual

Page: 65 / 93

Connecting Low Voltage Switches,
Z-MAX Remote Relay Panel User Guide, Revision A 8/2005
PK-93194-10-00-0A
Page 59
Step 2:
Insert the wires from the device into the connector
on the relay cabinet in the appropriate location
Step 3:
Tighten the terminal screw, and repeat for all wires
from the device
Step 4:
Plug the terminal block back into the cabinet with the
screws facing towards you and the wires exiting
towards the side or top of the cabinet. Alternatively,
the connector can be inserted with the screws
parallel to the circuit board and the wires exiting
towards you
Step 5:
Verify that the wires land on the correct terminals
WEB
VERSION