Leviton Z-MAX r24sd, User Manual

Page: 30 / 93

Page 24
cabinet must be configured via USB to start at relay number 73.
In summary:
•
Existing Master Cabinet with (48) relays, relay numbers 1-48
•
Existing Remote Cabinet with (24) relays, relay numbers 49-72
•
Added Remote Cabinet with (24) relays, relay numbers 49-96,
must be reconfigured via USB since out of box the default
setup is addressed to relay numbers 49-72 which would have
been in conflict with the existing cabinet.
Example 3 - 8 Relay Master, (2) 24 Relay Remotes, (3) 4
Relay Remotes
In order to execute this example, with (68) total relays, it’s
required to decrease the number of local relays in the (8) relay
master cabinet so that you canstay within the (96) relay
maximum per master/slave network, relay numbers are
contiguous, and the number of available relays are maximized.
First Let’s look at the "out of the box" configuration:
•
(8) Master cabinet, (8) relays, but # of local relays is 1-48
•
(24) Remote #1, (24) relays, 49-72 (out of box config)
•
(24) Remote #2, (24) relays, 49-72 (out of box config)
•
(4) Remote #1, (4) relays, starting relay number 0 (out of box
config)
•
(4) Remote #2, (4) relays, starting relay number 0 (out of box
config)
•
(4) Remote #3, (4) relays, starting relay number 0 (out of box
config)
You will note that there are substantial conflicts with the out of
the box configuration.
Therefore, the new configuration will look like this:
•
(8) Master cabinet, (8) relays, but # of local relays is 1-8
•
(24) Remote #1, (24) relays, relay numbers 9-32
•
(24) Remote #2, (24) relays, relay numbers 33-56
•
(4) Remote #1, (4) relays, relay numbers 57-60
•
(4) Remote #2, (4) relays, relay numbers 61-64
WEB
VERSION