Leviton Z-MAX r24sd, User Manual

Page: 64 / 93

Page 58
Please remember to verify the function of each pin as labeled on
the product with the device being wired to ensure that it is wired
correctly.
Regardless of the pinout of your particular product, the common
designations for terminals are as follows:
By default the "IN" or the "ON" terminal is expV to
trigger as would be typical with many styles of low voltage
switches. If a connection to common is required, it requires some
jumper and software reconfiguraiton. For more information on
this topic, please reference the discussion on input triggers found
on page 52.
Connecting Low Voltage Switch
Step 1:
Strip each wire from your device and tightly twist the
wires together
Pin Label Function
+24V Su24Vdc power to devices, usually
unregulated
COM Connection to DC Common of the cabinet
IN Switch Input or signal from device. Usually
expV to trigger.
OUT Used for connection to device LED indicating on/off
state of that input. Connects to common when on,
floats when off. (Max 0.04A)
LED Used for connection to device LED indicating on/off
state of that input. Connects to common when on,
"floats" when off. (Max 0.04A)
ON Usually can be configured identically to the IN
terminal but can be configured as Momentary ON
input only
OFF Momentary OFF input only
WEB
VERSION