11
x1
Back 2/2 Who Is
UPDATE CNTRLS
Hall Controller
Room Controller
8:35A
x1
NO
YES
UPDATE
Please stand within
3 ft from controller
and press YES
to continue
8:35A
x1
UPDATE
Node Updated!
Node ID #4
Room controller
8:35A
Finalize? Press
STEP 4
x1
Back
Next Step
AREA
8:35A
<< NEW >>
Select? Press
x1
Back
INSTALL CHECKLIST
1. Include Dim/Swch
2. Include Controller
3. Update Controller
5. Set Associations
Next Step
8:35A
4. Create Areas
Press the center button to
bring up the
UPDATE CNTRLS
screen where a list of all the
controllers in the network will be
displayed. With the selection box
around the first controller listed
press the center button . The
VRCPG will prompt you to stand
within 3 feet of that controller.
Press the right soft key
(YES)
to update your controller.
NOTE:
It is important that you remain
within 3 ft. of the controller
you've selected from the list.
If you are unsure about which
controller you are updating you
can use the "Who Is" command
(see pg. 15). Leviton controllers
will blink during the update
process, confirming you are
updating the correct controller.
Once the VRCPG confirms
UPDATE it will display the updated node information.
Press the center button to finalize.
Continue this process until all of your controllers
have been updated. Each time you successfully
update your controller it will be removed from the
list. Once all of your controllers have been updated,
press the right soft key to continue to the
NEXT
STEP.
Create Areas
NOTE: The INSTALL
CHECKLIST screen will appear
with the selection box around
STEP 4 - Create Areas when
NEXT STEP is chosen from
STEP 3. NOTE: Areas are a set
of devices that will be controlled
as one.
Press the center button to
bring up the
AREA screen. With
<< NEW >> selected press the
center button to bring up the
CREATE AREA screen.
