P5
Fuse pre-installed in BLACK fuse cover supports 220V AC Power only
Fuse pre-installed in GREY fuse cover supports 110V AC Power only
Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
Choose the correct fuse for your voltage before connecting power.
REPLACE FUSE
CAUTION:
Step 1: Unplug the product from power.
Step 2: Use a slotted screwdriver, push slightly and rotate counterclockwise
to open the fuse cap.
Step 3: Take out the fuse cap and fuse. Put a new fuse inside the fuse cap.
Step 4: Screw the fuse cap back in place and reconnect power.
CONNECT POWER
CAUTION:
LEO™ LED Zoom Ellipsoidal comes with a power lead terminated with a powerCON
®
A connector on
one side, and a PBG NEMA 5-15P connector on the other side. Other connector options are available
from Leviton or may be installed by your contractor. In addition, the fixture is designed for "Feed-Thru"
operation using single power source connection at the first fixture, then, using powerCON
®
extensions
between fixtures. The maximum load supported is 16A through the powerCON
®
connectors which is
reduced to 15A if you use a 15A source power connector like a NEMA 5-15P.
If creating your own powerCON
®
connectors, use the table below to wire the included powerCON
®
B
connector, or a local plug to the power lead.
Connection
Wire
AC Live
Brown
AC Neutral
Blue
AC Ground
Green / Yellow
WARNING: TO AVOID SERIOUS PERSONAL INJURY, always connect this product to
a grounded circuit.
FUSE 110V/6A; 220V/3A
SLOW BLOW
OPEN
LOCK
