P11
CONTROL ATTRIBUTES AND DEFAULT SETTINGS
The LEO™ LED Zoom Ellipsoidal fixtures have several different control attributes. With the exception of
the dimming attribute which must be assigned a DMX value for remote control, all other attributes may be
manually set only at the fixtures, or, remote controlled from your DMX console. Therefore, from a DMX
perspective, your fixture may be a 1, 2, 3, or 4 channel fixture depending on which attributes are assigned
to a channel. Some customers will assign a unique DMX address for each dimming attribute, then, a
common channel for all other attributes so fixtures are always controlled together. The system is flexible
so the specific configuration is up to you.
Control Attribute
Value
Range
Default
Value
Options
DMX Value
Level
Remarks
Dimming
Address
1-512
1
Mandatory to assign DMX
channel to this attribute
Dimming mode
Option
0-2
0
0
1
2
Dimming according to
DMX value
Dimming according to
manual knob
Restore to factory setting
LCD display on
time
Option
1-5
1
0-50
51-100
101-150
151-200
201-255
1
2
3
4
5
Continuously on
LCD display off after 30
seconds
LCD display off after 1
minute
LCD display off after 2
minutes
LCD display off after 3
minutes
LCD display on
time
Address
1-512
0
0-255
Operation mode
Option
0/1
1
0-127
128-255
0
1
Live: Light output will be
the first priority
Safe: LED over-temp
protection, light output will
be limited when temp. over
149°F (65°C)
Operation mode
Address
1-512
0
0-255