5
Measurements
It is recommended to calibrate the system before proceeding with measurements.
Straight line.
Press and hold the left mouse button to start drawing a line. Release
the left mouse button to complete the line.
Continuous Line.
Press and hold the left mouse button and draw a line. Release
the left mouse button to complete the segment. You can continue adding more
segments to the free-form line.
Radius Circle.
Draw a straight line on the image. The application will automatically
calculate the radius, as well as circumference and area of the corresponding circle.
Diameter Circle.
Draw a straight line on the image. The application will
automatically calculate the diameter, as well as circumference and area of the
corresponding circle.
Three Points Angle.
Press and hold the left mouse button to draw a line on the
image. Release the left mouse button and draw another line. The application will
automatically calculate value of the resulting angle.
Draw and text
PortableCapture allows you to add drawings and textboxes to your images. Open an
image in a preview window and click the Pencil icon on the toolbar. Select one of the
tools from the drop-down menu and draw something on the image. By clicking the
TT icon on the toolbar, you can edit font type and color to be used in textboxes.
Specifications
Levenhuk reserves the right to modify or discontinue any product without prior
notice.
System requirements
Operating system: Windows 7/8/10, Mac 10.14 and above
CPU: at least P2 1GHz or above, RAM: 512MB, Video card: 512MB
Interface: USB 2.0, CD drive, any monitor with AV input
Care and maintenance
Never, under any circumstances, look directly at the Sun, another bright source
of light or at a laser through this device, as this may cause PERMANENT
RETINAL DAMAGE and may lead to BLINDNESS
. White LEDs are very bright;
do not look at them as this may cause permanent damage to your vision. Take
necessary precautions when using the device with children or others who have not
read or who do not fully understand these instructions. Do not try to disassemble
the device on your own for any reason. For repairs and cleaning of any kind, please
contact your local specialized service center. After unpacking your microscope and
before using it for the first time check for integrity and durability of every component
and connection. Do not touch the optical surfaces with your fingers. To clean the
device exterior, use only special cleaning wipes and special optics cleaning tools
from Levenhuk. Do not use any corrosive or acetone-based fluids to clean the
optics. Abrasive particles, such as sand, should not be wiped off lenses, but instead
blown off or brushed away with a soft brush. Do not apply excessive pressure when
adjusting focus. Do not overtighten the locking screws. Protect the device from
sudden impact and excessive mechanical force. Store the device in a dry, cool place
away from hazardous acids and other chemicals, away from heaters, open fire and
other sources of high temperatures. Do not use the device for lengthy periods of
time, or leave it unattended in direct sunlight. Keep the device away from water
and high humidity. Do not submerge. Be careful during your observations, always
replace the dust cover after you are finished with observations to protect the device
from dust and stains. To avoid data loss or equipment damage, always close the
application first, and then disconnect the microscope from your PC. Wait until the
illumination goes off completely, and disconnect the microscope.
Children should
use the device under adult supervision only. Seek medical advice immediately if
a small part or a battery is swallowed.
Battery safety instructions
Utilize used batteries as prescribed by your country laws. Never short-circuit
batteries as this may lead to high temperatures, leakage, or explosion. Never heat
batteries in order to revive them. Remember to switch off devices after use. Keep
batteries out of the reach of children, to avoid risk of ingestion, suffocation, or
poisoning.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars and other optical products,
except for accessories, carry a l
ifetime warranty
against defects in materials and
workmanship. Lifetime warranty is a guarantee on the lifetime of the product on the
market. All Levenhuk accessories are warranted to be free of defects in materials
and workmanship for
six months
from date of retail purchase. The warranty entitles
you to free repair or replacement of the Levenhuk product in any country where
a Levenhuk office is located if all warranty conditions are met. For further details
please visit our web site:
www.levenhuk.com/warranty/
If warranty problems arise, or if you need assistance in using your product, contact
the local Levenhuk branch.
LCD display 4"
Optics material optical glass
Megapixels 5
Magnification 10–300x
Photo *.jpg
Video *.avi
Focusing manual, 0–100mm
Speed 30fps
Illumination 8-LED system with brightness adjustment
Body material plastic
Power source 5V DC-in via USB cable or Li-ion battery: 3.7V, 1050mAh
work time: 2.5 hours; charging time: 4 hours
Software image and video processing software with measurement
function
Software language English, German, French, Spanish, Russian, Japanese,
Chinese, etc.
Ability to connect
additional equipment
support of microSD cards with capacity up to 32GB (not
included in the kit)
connect to PC via USB cable (included)
connect to TV via AV cable (included)
Operating temperature
range
−10…+65 °C / 14… 149 °F
