3
Playback
Press the Photo/Video/Playback button (19) to switch to playback mode. The icon
in the upper left corner of the screen will change in confirmation. Select the desired
photo or video clip with UP (18) and DOWN (21) buttons and press OK (20) to play it.
Deleting files
When browsing saved files, press the Setup button (16), select Delete… and press
OK (20) to confirm selection (you can choose to delete everything or just the selected
file from the displayed menu).
Protecting files
When browsing saved files, press the Setup button (16), select Protect and press OK
(20) to confirm selection (you can choose to protect everything or just the selected
file from the displayed menu).
Zoom
Scroll the zoom adjustment wheel (2) to zoom your view in or out.
Polarizing filter
You can use a polarizing filter to reduce light reflection while observing objects
with a shiny surface like metal, crystals, etc. Rotate the polarizing wheel (3) by 90
degrees to activate or deactivate the polarizing effect.
Mass storage on PC
Insert a microSD card in the slot. Connect the microscope to your PC with the USB
cable to download images from the card to your computer.
Preview on PC
Only works with the software installed. Remove the microSD card from the slot.
Connect the microscope to your PC with the USB cable.
Connecting the microscope to a TV-set
Plug the AV cable into the microscope and connect it to your TV-set (refer to the
User Guide of your TV-set for additional information). Turn on the TV and select the
correct channel from the corresponding menu of the TV-set (refer to the User Guide
of your TV-set for additional information).
Attaching the tripod
Place the tripod on a stable surface. Connect the tripod to the threaded hole (9)
on the microscope and rotate the microscope until it locks in place. Do not apply
excessive pressure during rotation, as this may damage both the microscope and
the tripod. Tripod height may be adjusted, if necessary.
Display menu
Press Setup button (16) to open the main display menu. From this menu you
can set image and video resolution, the interface language, date and time, turn
on the power saving mode, set up the TV connection, format the SD card, reset
settings and check the hardware version. Also, this menu provides access to the Loop
recording mode and Date Stamp option.
Resolution
Select the image or video resolution from the main menu and choose the required
resolution by pressing the Down button (21), then confirm by pressing the OK button
(20).
Note:
This model supports the following image resolutions: 12M, 10M, 8M, 5M, 3M;
video resolutions: 1080P, 720P.
Capture mode
In photo mode, press the Setup button (16) and choose the Capture mode to setup
the sequence capture. For example, you can set up the microscope to take a photo
every 5 seconds.
Loop recording
In video mode, press the Setup button (16) and choose the Loop recording mode.
You can select the duration of the video clip or turn the Loop recording mode off.
While the Loop recording mode is on, each video clip of selected duration will be
recorded over the previous one.
Date Stamp
Select Date Stamp from the main menu and then select a target option.
Date and time
Select Date/Time from the main menu by the Down button (21) and set the current
date and time.
TV connection
Select TV Mode from the main menu and then select, between NTSC and PAL,
the correct mode compatible with your TV. Press the OK button (20) to confirm
selection.
Power saving
Select Auto Power Off from the main menu and set the idle time before the
microscope automatically shuts down. Press the OK button (20) to confirm selection.
Settings reset
Select Default Setting from the main menu to revert back to factory settings.
Language
Select Language from the main menu and choose one of the existing settings. Press
the OK button (20) to confirm selection.
MicroSD card formatting
Select Format SD from the main menu to format the installed memory card. All the files
on the card will be deleted after card formatting. Normally card formatting is not
necessary, unless your card is not able to store the captured image.
