131
9.3. AP Discovery
Configure Discovery AP; go to:
Access Points >> Enter Local Area AP Management >> Discovery
.
After AP template configuration is complete, use this function to detect and scan for all of the APs connected under
the managed network. Note that in
Local Area AP Management
the WHG Controller can only manage APs that are
connected to its LAN ports. Therefore, the AP discovery function is for adding locally connected APs to its
management list. The administrator must know the local IP addresses of the APs he/she wishes to discover. Or the
alternative is to reset the AP to default setting for discovery.
To discover AP:
AP Type:
Choose the type of AP you wish to discover.
Interface:
Select which interface to scan. For example if “Default” is selected, all of the APs connected
under default service zone matching the selected AP type will be scanned and listed.
Admin Settings Used to Discover:
Select “Factory Default” when the connected AP is under default
settings. Select “Manual” and fill in the IP address range if the connected APs’ IP address has been
modified.
Click the
Scan Now
button and the APs matching the configured criteria will de displayed in the
Discovery Results
list below.
Summary of Contents for WHG-311
