LevelOne WHG-311, User Manual, Page: 77 / 307

77
Attributes Priority
The drop down selection list allows 3 options: Follow Server’s
Setting , Overwrite Server’s Setting and Set if not presented .
If Follow Server’s Setting is selected, system will use the RADIUS
attributes set in the remote RADIUS server. If Overwrite Server’s
Setting is selected, system will use the RADIUS attributes set below.
If Set if not presented is selected, system will use the RADIUS
attribute settings below if the configured remote RADIUS server
presents no attributes.
RADIUS Standard Attributes

Session Time Out: Forced logout once timeout period
reached.

Idle Time Out: Implicitly logout when inactivity timeout period
reached.

Acct Interim Interval: The time interval to send accounting
updates.
WISPr Vendor Specific Attributes Default from the drop-down
menu is to follow external Server settings. If you select to overwrite or
set if not present, the following attributes will be required.

Redirection URL: URL of Start page.

Billing Class Of Service: Text string used to indicate service
used for the visitor access.

Session Terminate on Billing Time: When enabled, the
session will terminate in the Billing Time set.

Session Terminate Time: Never. This means that RADIUS
sessions will only terminate when a user logouts, gets kicked
out, or session idled timeout.

Bandwidth Setting: It will follow the Bandwidth settings of the
Group profile set for this authentication server.
Retransmission
Settings

Bandwidth Setting: The number of resends before
treating this transaction as fail.

Timeout: The time in seconds to wait for reply from
RADIUS server, if no reply then resend the packet.
Primary / Secondary RADIUS Server
Authentication
Server
Enter the domain name or IP address of your RADIUS Server.
Authentication Port Enter the Port number used for authentication
Authentication
Secret Key
Secret Key used for authentication
Authentication Select Challenge-Handshake Authentication Protocol (CHAP) or