LevelOne WHG-311, User Manual, Page: 301 / 307

301

Multiple User is the port type used for rooms with many users for example dormitory applications. If the
user opens a browser and tries to access internet, a user login page without billing plan options will be
displayed. The user needs to buy accounts from the front dorm office in order to login. The room with this
port type allows more than one user to access the network within the room.
Now, let us begin to configure the Port Mapping. There are three main groups of operations that can be performed in
this configuration page: Create Batch , Change All Port Type and Create One .
You can create the Room Mapping by batch processing if you wish to create a contiguous VLAN Tag and Room
number.

Port Location Mapping Setup – Create Batch

From: Set the Physical LAN port on the gateway to provide Port Location Mapping Service.

Port Type: The default state of the rooms, it may be: Free, Block, Single User, Multiple User.

Service Zone: The service zone profile used to provide internet service to the corresponding room or
location.

VLAN ID Start: The starting VLAN ID.

Number of VLAN: The total number of VLAN.

Start Room Number / Location ID: The start room number.

Room NUM / Location ID Prefix: The prefix of room number.

Room NUM / Location ID Postfix: The postfix of room number.
After you have created the VLAN Tag and Room number mapping, you can change the Port Type for all entries in a
particular Service Zone.

Port Location Mapping Setup – Change All Port Type
Port Type: The Port Type that will be applied to all of the mapping entries, it may be: Free, Block, Single
User, Multiple User.
Service Zone: Select to change the Port Type of which Service Zone.
If you want to create the Room Mapping with noncontiguous VLAN Tag and Room number, then you can create
them individually.