LevelOne WHG-311, User Manual, Page: 149 / 307

149
1. Setup the Interval
Configure Interval; go to: Access Points >>AP Load Balancing .
Go to: Access Points >>AP Load Balancing >> Configuration .
Input an Interval , if you input “0”, it means “ Disabled ”, and system will not enable the AP Load Balancing function.
2. Configure the Loading of Threshold of each Group
Configure Group Configuration; go to: Access Points >>AP Load Balancing >>Group Configuration .
You can choose the Loading Threshold of each group. Also you can disable the AP group, if the group is disabled;
this group of AP will not enable the Load Balancing function.
3. Add the AP to the Group
Configure AP to the Group; go to: Access Points >>AP Load Balancing >>Device List .