-76-
Authenticator: Wireless Network Access Point
This is the web page configuration in LevelOne Access Point that we use.
1. Enable 802.1x security by selecting “
Enable
”.
2. If
MD5
EAP methods is used then you can skip step 3 and go to step 4.
3. Select th e
Encryption Key Length Size
ranging from 64 to 256 Bits that you would like to
use.
Select the
Lifetime of the Encryption Key
from 5 Minutes to 1 Day. As soon as the
lifetime of the Encryption Key is over, the Encryption Key will be renewed by the Radius
server.
4. Enter the
IP address
of and the
Port
used by the
Primary
Radius Server
Enter the
Shared Secret
, which is used by the Radius Server.
5. Enter the
IP address
of,
Port
and
Shared Secret
used by the
Secondary
Radius Server.
6. Click “
Apply
” button for the 802.1x settings to take effect after Access Point reboots itself.
NOTE:
As soon as 802.1x security is enabled, all the wireless client stations that are connected to the
Access Point currently will be disconnected. The wireless clients must be configured manually
to authenticate themselves with the Radius server to be reconnected.
Summary of Contents for WAP-0003
