LevelOne WAP-0003, User Manual

Page: 7 / 105

-7-
CONFIGURING LevelOne 54Mbps
WIRELESS ACCESS POINT
The web-based configuration menu provides user friendly graphic design for easy configuration.
Please go through the following check list before you consider using the configuration menu.
1. You will need a JavaScript enabled web browser such as Internet Explorer v5.5 or higher
versions.
2. The Ethernet network adapter must be working properly. Please refer to Troubleshooting
section for details.
3. If you are connecting LevelOne Access Point thro ugh a router or a local area network, which
has DHCP server enabled, you will not need to assign a static IP address to the computer
that you are using to configure the Access Point. Please go to check item no. 6
4. If you are not connecting LevelOne Access Point through a router or a local area network,
which has DHCP server enabled, you will need to assign a static IP address to the computer
that you are using to configure the Access Point.
5. The IP address assigned to the computer that you are using to configure LevelOne Access
Point must be in the same IP address range as Access Point’s. Please refer to Networking
Basis section to learn more about assigning IP address.
6. The power jack must be properly inserted to make sure that LevelOne Access Point is
powered.
The Default Settings of LevelOne 54Mbps Wireless Access Point:
IP Address 192.168.1.1
User Name Admin
Password Admin
ESSID Wireless
Channel 6
WEP Disabled