LevelOne WAP-0003 User Manual Download Page 13

Page: 13 / 105

-13-

Firmware Version:

Shows the current firmware version

LAN:

Shows the Mac address, IP address (default: 192.168.1.1), Subnet Mask, Gateway

Address. The current LAN traffic calculated in terms of number of packets sent and received by
AP through wired connection is also displayed.

Wireless:

Shows the Mac address, current ESSID, the status of Encryption Function (Enable or

Disable), the cu rrent using channel. The current wireless traffic calculated in terms of number of

packets sent and received by AP through wireless communication is also displayed.

View Log:

Upon clicked, the page will change to log page. The log page records every event

and the time that it happens.

You may clear the entries recorded in the log by clicking the “

Clear Log

” button, and refre sh the

screen to show the latest log entries by clicking the “

Refresh

” button.

Summary of Contents for WAP-0003










































































































Search results

Summary of Contents for WAP-0003

Reviews:

Related manuals for WAP-0003

Brands by name

Popular brands

LevelOne WAP-0003, User Manual

Search results

Summary of Contents for WAP-0003

Reviews:

Related manuals for WAP-0003

Brands by name

Popular brands