User Manual
Publication date: May, 2005
Revision A1
62
3-5. Bandwidth Management
Function name:
Bandwidth Management
Function description:
Bandwidth Management function is used to set up the limit of Ingress and
Egress bandwidth for each port.
Fig. 3-15
Parameter description:
Port Number:
Choose the port that you would like this function to work on it. Valid
range of the port is 1~12.
All Traffic for Ingress Rate Limiting(Policing):
Set up the limit of Ingress bandwidth for the port you choose. Incoming
traffic will be discarded if the rate exceeds the value you set up in Data
Rate field. Pause frames are also generated if flow control is enabled.
The format of the packet limits to unicast, broadcast and multicast. Valid
range is 0~1000.
Broadcast & Multicasat for Ingress Rate Limiting (Policing):
Set up the limit of Ingress bandwidth for the port you choose. Incoming
traffic will be discarded if the rate exceeds the value you set up in Data
Rate field. The format of the packet limits to broadcast and multicast.
Valid range is 0~1000.