LevelOne ProCon GSW-1291 User Manual Download Page 167

Page: 167 / 234

User Manual

Publication date: May, 2005

Revision A1

163

mirror

set mirror-mode

Syntax

set mirror-mode <rx|disable>

Description

To set up the mode of Mirror (rx mode or disable).

Argument

rx : Enable the mode of Mirror(Only mirror the packets that is received)

disable: End the function of mirror

Possible value:

None

Example:

GSW-1291(mirror)# set mirror-mode rx
GSW-1291(mirror)#

set monitoring-port

Syntax

set monitoring-port <#>

Description

To set up the monitoring port of the mirror function. User can observe the packets
that the monitored port received via this port.

Argument

<#>: the monitoring port that is chosen for the mirror function. Only one port is
allowed to configure.

Possible value:

None

Example:

GSW-1291(mirror)# set monitoring-port 2
GSW-1291(mirror)#

set monitored-port

Syntax

set monitored-port <range>

Description

To set up the port that will be monitored. The packets received by this port will be
copied to the monitoring port.

Argument

<range>: the port that is chosen for monitored port of the mirror function.

Possible value:

None

Example:

GSW-1291(mirror)# set monitored-port 3-5,8,10
GSW-1291(mirror)#

Summary of Contents for ProCon GSW-1291











































































































































































































































Search results

Summary of Contents for ProCon GSW-1291

Reviews:

Related manuals for ProCon GSW-1291

Brands by name

Popular brands

LevelOne ProCon GSW-1291, User Manual

Search results

Summary of Contents for ProCon GSW-1291

Reviews:

Related manuals for ProCon GSW-1291

Brands by name

Popular brands