LevelOne GEL-5261, User Manual

Page: 173 / 570

Chapter 6
| Address Table Settings
Changing the Aging Time
– 173 –
Web Interface
To clear the entries in the dynamic address table:
1.
Click MAC Address, Dynamic.
2.
Select Clear Dynamic MAC from the Action list.
3.
Select the method by which to clear the entries (i.e., All, MAC Address, VLAN, or
Interface).
4.
Enter information in the additional fields required for clearing entries by MAC
Address, VLAN, or Interface.
5.
Click Clear.
Figure 93: Clearing Entries in the Dynamic MAC Address Table
Changing the Aging Time
Use the MAC Address > Dynamic (Configure Aging) page to set the aging time for
entries in the dynamic address table. The aging time is used to age out dynamically
learned forwarding information.
Parameters
These parameters are displayed:
◆ Aging Status – Enables/disables the function.
◆ Aging Time – The time after which a learned entry is discarded. (Range: 6-7200
seconds; Default: 300 seconds)
Web Interface
To set the aging time for entries in the dynamic address table:
1.
Click MAC Address, Dynamic.
2.
Select Configure Aging from the Action list.
3.
Modify the aging status if required.